My space station environment was put together and recorded in Lightwave Layout. Due to all of the pieces I created in Modeler being modular, I was able to copy and paste certain parts, such as the hallways, and place them in different locations on the station.
Occasionally I had trouble with certain pieces clipping through each other, and hallway pieces not quite fitting together with the doorways.
Environment Assembly
To start off the assembly of my environment I placed down the hangars and connected them with the wide hallway variants.
The next piece of the station was the bridge, which was connected by a 3-way hallway.
Then I created a hallway from the 3-way hallway which lead to a 4-way hallway, leading towards the canteen, the research room, and another hallway leading to the rest of the station.
The next thing I built was the dorm rooms and bathrooms. This was the hardest to put together, because there were a lot of objects in such a small space.
Then I made the narrow hallway that connects the dorms to the canteen.
When adding my dome-shaped rooms to the station, I had to place the hallways slightly into the room due to the walls being round.
Adding Props
Once all of the rooms were put together, I started adding the props into the map. The first props I added were the beds in the dorm room. I was only able to fit 3 beds in each room.
The next things I added were the benches and tables for the canteen. The tables were also used in the dome-shaped rooms and the research rooms.
The computers were mostly meant to be used in this room, but when I created the 2 different types of computers, I decided to use the wall variant in the research rooms.
In the dome-shaped rooms, I had the normal computer & keyboard resting on top of a table that was clipped into the back wall.
For the bridge, I also added the wall computers on the pillars inside the room.
No comments:
Post a Comment